-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
This stylish, modern tall tap is the perfect counterpart for a contemporary countertop basin, equipped with an easy-to-use single lever offering precise operation of water flow and temperature. Equipped with ceramic disc technology and a body made from solid brass, this tap is built to withstand the test of time. Its aerated spout produces a soft, “champagne-like” flow of water, offering a luxurious experience with every use.
Featuring cold start technology, this tap delivers only cold water when the handle is in its default position. Unlike other taps that provide a mix of hot and cold water, this design helps save energy by not unnecessarily activating your boiler. By reducing hot water usage, it also helps minimise sediment buildup in hot water pipes, improving overall water quality. This tap is also WRAS approved, guaranteeing full compliance with the strict standards set by the Water Regulations Advisory Scheme for safety and performance.
Features:
Featuring cold start technology, this tap delivers only cold water when the handle is in its default position. Unlike other taps that provide a mix of hot and cold water, this design helps save energy by not unnecessarily activating your boiler. By reducing hot water usage, it also helps minimise sediment buildup in hot water pipes, improving overall water quality. This tap is also WRAS approved, guaranteeing full compliance with the strict standards set by the Water Regulations Advisory Scheme for safety and performance.
Features:
- Contemporary tall basin tap ideal for any countertop basin
- Brass body and zinc alloy handle providing durability and a high resistance to corrosion
- Ceramic disc technology to prevent excess drips and leaks
- Cold start technology saves energy by only heating water when needed
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Minimum 0.5 bar water pressure
- Easy-to-use single lever control
- WRAS approved
- Complies with BS6920 and BSEN200
- Matching basin waste sold separately, please see our recommended extras
- 5 year manufacturer’s guarantee
| Product Code | hrb-clarity-tall-basin-tap-pv |
|---|---|
| Type | Basin Mixer Taps, Tall Basin Mixer Taps |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 5 Years |
| Global Trade Item Number | Select an option first |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
| Popular Features | Energy Saving Cold Start Technology, WRAS Approved |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Material | Brass, Zinc Alloy |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Round, Single Control |
| Spout TypeMore information | Curved Spout, Fixed Spout |
| Finish | Select an option first |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 41 |
|---|---|
| Height (mm) | 310 |
| Depth (mm) | 165 |
| Projection (mm) | 100 |
| Flow Rate at 0.5 Bar (l/min) | 5.1 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 6.7 |
| Flow Rate at 2 Bar (l/min) | 9.1 |
| Flow Rate at 3 Bar (l/min) | 11 |
| Flow Rate at 4 Bar (l/min) | 12.6 |
| Flow Rate at 5 Bar (l/min) | 14 |
| Minimum Water PressureMore information | 0.5 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
